26 April 2018
These filters retain impurities and liquids extracted through vacuum cups or vacuum clamping systems, preventing them from entering into the vacuum pumps.
They are composed of: – A transparent Plexiglas cylindrical container with an extractable lid to allow inspection and cleaning. – A check valve located on the suction inlet for preventing the air from returning in the filter when the pump is idle. – A stainless steel mesh filtering cartridge with a filtering degree equal to […]
24 April 2018
The cartridges described in this page are suited for FO oil-bath suction filters.
They are made with pressed steel wool contained in a double perforated sheet steel enclosure. Their function is to retain fine or impalpable dust impregnated with the filter oil. Product codes: 00FO04 00FO09 00FO14 00FO19
23 April 2018
In presence of a considerable amount of fine or impalpable dust, the traditional suction filter would require a cartridge with a filtering degree so high that, along with reducing its operation autonomy, it would also reduce the vacuum pump suction capacity.
Oil-bath suction filters have been studied in order to overcome this problem. The main feature of these filters is the ability to retain the smallest and most impalpable dust particles, without reducing the vacuum pump suction capacity. Oil-bath filters are composed of a sheet steel head and container coupled with an interposed seal and clamped […]
20 April 2018
These suction valves, once laid on the resin infusion mould connections, allow a quick vacuum connection and guarantee a perfect seal.
They are made with silicon rubber, while their support is made with anodised aluminium. Manual 2-way valves, quick couplers or simply flexible pipe fittings can be assembled onto these valves. They are available in the two versions shown below, but can be supplied in different sizes and shapes upon request. Product codes: 088515S1/2 088515S3/4
19 April 2018
The cartridges described in this page are suited for FC suction filters.
They are made with a special treated paper, with a filtering degree equal to 5 ÷ 7 μ, which is pleated to increase its surface and contained into a double perforated sheet steel enclosure. They are recommended for retaining fine and impalpable dust, but not in presence of water and oil vapours and condensation. Product […]
18 April 2018
The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum generator of the M .. SSX range has allowed creating these small pneumatic suction pumps.
Their main features include reduced overall dimensions compared to their technical performance. The vacuum level and capacity can be adjusted according to the supply air pressure. These pumps are supplied by compressed air with a pressure ranging from 1 to 5 bar (g) and they can produce a maximum vacuum of 85% and a suction […]
17 April 2018
The suction valves described in this page have been designed for a quick vacuum connection on press bags for composite fibre products.
These valves are composed of a steel distributor, to be inserted inside the bag, equipped with a cam housing suitable for the quick coupler for the vacuum connection. The latter is made with reeded and anodised aluminium and is easily coupled with the distributor by simply rotating it on its axis by 90°, once it’s […]
16 April 2018
With the suction and blowing system AS we have tried to provide the printing industry with an answer to most of their requirements regarding the management of paper during the printing process, i.e.:
– The concentration of all the necessary pumps and commands on one single piece. – An increased printing quality thanks to individually controlled pumps. – An increase of productivity resulting from the configuration and use of individual pumps. – Reduced machine idle state due to the pneumatic pumps based on the Venturi principle. – An […]
13 April 2018
To allow the pneumatic suction and blowing pumps to work even in very dusty environments it is necessary to use these filters that, installed on the suction inlet connection, can keep the finest dust and impurities and affecting the capacity in a negligible manner.
The filtering cartridges, in fact, are made with a special treated paper with a porosity level of 5 ÷ 7 micron, and pleated to increase the filtering surface. FCL filters are composed of a transparent plexiglas cylindrical body inside of which is located the filtering cartridge locked by two anodised aluminium flanges that are kept […]
12 April 2018
This month we focus on new RVP single-stage rotary vane pumps, by Vuototecnica.
They are new entries and are already having a great success in terms of performance. Here in 10 points why: They are made in quality materials; They are compact and suitable for heavy duty and continuous work; They are quiet and do not overheat during operation; They comply with the latest European standards (IEC60034) and […]